Botsman S

Mini suction cutter dredger, excavator

The dredger cleans water bodies from silt, vegetation, sludge, tailings, garbage. Performs dredging and bank consolidation works. The dredger can also take part in the construction and operation of hydraulic structures. Extracts sapropel, peat, mud, etc. The multi-purpose system can cope with any landscaping task. A special feature of this dredger is the unique milling cutter complete with a grinder, which contributes to the smooth and clog-free operation of the pump. Spuds enable the system to perform its works more accurately. The pontoon is divided into two sealed compartments and equipped with automatic bilge pumps.

Pump capacity 

                 120 m³/час.

Capacity in dry ground equivalent

                 12 m³/час.

    Head

27 meters

Motor pump

Robin Subaru PTX 401

    Hydraulic station engine 

                 15 л.с.

Maximum distance  of horizontal soil transportation with 10% of solid

                 250 m.

Maximum cutter depth up to

                 до 6 m.

Maximum depth of excavator boom or fork working

                 3,9 m.

Diameter of suction and pressure slurry pipeline

                 100 mm.

Length/width/height of the dredger (vessel)

                 3,8/2,4/2 m.

Boom-end load capacity (4.5 m.)

                 400 кg.

Boom swing

                 140 degrees

Movement, lowering and lifting

Excavator boom, outboard motor

cutting and grinding

Method of dredge working

Maximum diameter of input solids

                 30 mm.

Hydraulic spuds

                 5 m.

Operational condition draft

                 0,3 m.

Hydraulic station fuel tank capacity

                 6 l.

Power supply voltage

                 12 V

Dredger gross weight

                 1,7 т.

Transportation in operational condition

1 truck trailer

• All-metal pontoon vessel with built-in reinforced swivel mechanism, divided into two sealed compartments. Hatch for compartments.

• Excavator hydraulic boom with 140 degrees of rotation.

• Dual-circuit hydraulic station, 15 hp.

• Motor pump CHAMPION gtp101e, China, equipment, 107 m3/h.

• Milling cutter with grinder, reverse, hydraulic drive and boom attachment.

• Reverse bucket, 60 l.

• Suction hose, 6 meters in length, 100 mm in diameter.

• Driver's workstation.

• Lift-on/lift-off mounts.

• Hydraulic oil level and temperature sensors.

• Control panel with joysticks.

• Data sheet, operational manual.

• Certificate.

                                                       Price: 11 250 EURO.

​

1. Six-tooth fork with drain grid  - 550 EURO.

2. Hydraulic spuds - 1 800 EURO.

3. Walking spuds - 3 100 EURO.

4. Float hydraulic supports, 2 pieces - 1 600 EURO.

5. Front hydraulic supports - 1 200 EURO.

6. Automatic bilge pumps in compartments - 260 EURO.

7. Wheels for transportation of spuds on solid ground (soil, asphalt) - 490 EURO.

8. Wearproof rubber latex fire hose with impregnation. 20 meters in coils - 120 EURO. 

9. Cab with hinged roof - 550 EURO.

10. Hydraulic drill - 1 200 EURO.

11. Log grab - 1400 EURO.

12. Hydraulic vibratory pile driver - 2500 EURO.

13. Outboard motor .

14. Collector rake with grid - 550 EURO.

15. Repair kit for hydraulics - 290 EURO. 

16. Hood for engine and pump - 40 EURO.

17. Reed mower K1 - 2 800 EURO.

18. Propellers with hydraulic motors, hydraulic lift. Control panel - 2 100 EURO.

19.  Navigation - 750 EURO.

20. Online video monitoring  - 700 EURO.

21. Hydraulic-driven electric unit.

22. Hydraulic welding machine.

23. Hydraulic-driven pneumatic unit.

24. Transom for outboard motor with lifting and lowering mechanism - 250 EURO.

25. Built-in box for spare parts and tools - 98 EURO. 

26. Wrench for hose heads, diameter 100-150 mm - 8 EURO.